It is made of an oak lamella of the finest wood species, regardless of the size of the flooring. It is set at 90 ° relative to the middle layer, which gives a special construction of the board that prevents the “work” of the wood.
Our parquets represent the “new generation” of parquets whose properties have been significantly improved over massive parquets. The multi-layered construction guarantees durability which is ensured by combining several types of wood into one unit.
Due to their two-layer or three-layer composition and the soothing effect of hard and soft wood, these parquets are protected from the effects of adverse environmental factors such as moisture in the substrate or in the air. That is the reason why our finished parquet floors retain their “original” appearance for a long time, do not dry out and do not crack.
Only our flooring can be installed by yourself !!!
No need to grind or hobble during the first installation !!
It is enough to roll the adhesive roller with the adhesive pad and carefully place the boards side by side.
A simple oil coating will provide additional protection to the flooring.
Each parquet floor is further accentuated by slightly sloping edges so that the entire space gets one compact whole.
It is set at an angle of 90 ° up to the upper layer. It is made of specially cut softwood slats to give the longitudinal position of the fibers, providing additional stability of the parquet floor.
It is made of the highest quality veneer wood and is a substrate to the middle layer, which gives the flooring more strength and stability while increasing the insulating ability of the parquet floor. Glued, these two layers form the so-called “carpet” which represents the “heart” of our flooring. In this way they give more volume to absorb humidity from the air in all four seasons.
120 x (500 do 1200) mm
150 x (600 do 1500) mm
180 x (800 do 2000) mm
210 x (1000 do 2200) mm
140 x (1000 do 2200) mm
180 x (1000 do 2200) mm
210 x (1000 do 2200) mm
220 x (1000 do 2400) mm
260 x (1000 do 2400) mm
280 x (1000 do 2400) mm
Free, natural timetable, without cracks or damage. Only healthy, non-clustered knots up to 5 mm (“bird’s eye”) are allowed. Maximum three knots per parquet board. Small differences in color and structure are allowed. Whites and discoloration are not allowed.
Free natural age distribution, without cracks or damage. Only healthy and processed (non-falling) nodes are possible. The number and size of nodes are not limited, nor is their arrangement. Cracked knots can be filled. Distinctive changes in color and structure and due whites are permitted.
Differences in color and structure are noticeable. The diameter of the knots is not limited if they do not affect the stability of the blade. Cracked knots and cracks can be machined and filled. Healthy whites are allowed. This structure is characteristic of oak and gives a very lively and rustic visual appearance.